Harbor Freight Tools 219 User Manual - Page 4
Operation, Unpacking
View all Harbor Freight Tools 219 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
21. Check hoses carefully. Never use the Grease Gun if the hoses are cracked, frayed, or kinked. Avoid problems by not severely bending the hoses. If hoses appear damaged, have them replaced. 22. This Grease Gun is designed only to hold and dispense grease. Never use it to hold and dispense any other material. Note: Performance of the compressor (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool performance. Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpacking, check to make sure the parts listed on page 9 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Operation Grease Gun 1/4"-18 NPT Female For best service you should incorporate an oiler, regulator, and inline filter, as shown in the diagram above. Hoses, couplers, oilers, regulators, and filters are all available at Harbor Freight Tools. 1. If desired, for quick tool connection, you will need to prepare a 1/4" quick air connector (not included) to connect to the air source hose. First, wrap the 1/4" quick air connector (not included) with pipe thread seal tape (not included) before threading it onto the 3/8" air source hose. Then, connect the 1/4" quick air connector to the Air Inlet (2) on the Grease Gun. Note: If you are not using an automatic oiler system, before operation, add a few drops of Pneumatic Tool Oil to the airline connection. Add a few drops more after each hour of continual use. 2. To check your air system, set the air pressure on your compressor to 90 PSI. Do not exceed the testing air pressure of 90 PSI. 3. Check the air connection for leaks. After test is complete, disconnect from the air supply until grease is loaded into the Air Grease Gun. SKU 00219 For technical questions, please call 1-800-444-3353. Page 4